Pentax Pump Pressure Boosting Pump Sets & Flow Control Units
Click on model links to enter the online shop for more information, prices & check out
Pentax PM45-A Pumps. Automatic Electronically Controlled Single End Pump
Pressurisation units consisting of a pressure switch and a single pump for automatic start-up, automatic switch-off and dry-running protection.
For hot or cold pressure boosting. 1" female thread on pump inlet, 1" male outlet thread on presscontrol unit. Max flow 40 litres per minute, maximum pressure 4 bar. Switches on when an outlet is opened and switches off in approx. 6-8 seconds when outlet is closed.
For prices and specifications click on models below
Pentax PM Peripheral Pumps with Hidromatic H2 Electronic Flow Control
Automatic working pressure systems build up with Peripheral pumps. Each set is ready for installation is made by a pump and a Hidromatic H2 pump controller which is a complete replacement of the traditional water system set consisting of a pressure switch and tank. The control of the pump is started after a pressure decrease (taps opening) and stopping when the water flow is interrupted at the maximum pressure level of the pump (taps closing). Protection against dry running.
Models Built To Order - Contact Us For Price
Pentax CAM CAB INOX MPX Pumps with Hidromatic H2 Electronic Flow Control
Automatic working pressure systems build up with centrifugal self-priming pumps. Each set is ready for installation is made by a pump and a Hidromatic H2 pump controller which is a complete replacement of the traditional water system set consisting of a pressure switch and tank. The control of the pump is started after a pressure decrease (taps opening) and stopping when the water flow is interrupted at the maximum pressure level of the pump (taps closing). Protection against dry running.
For prices and specifications click on models below
Pentax CAM 100 Pump With Hidromatic H2 Electronic Flow Control 230v
Other Models Built To Order - Contact Us For Price
Pentax CR Pumps with Hidromatic H2 Electronic Flow Control
Automatic working pressure systems build up with CR series threaded high flow low pressure centrifugal pumps. Each set is ready for installation is made by a pump and a Hidromatic H2 pump controller which is a complete replacement of the traditional water system set consisting of a pressure switch and tank. The control of the pump is started after a pressure decrease (taps opening) and stopping when the water flow is interrupted at the maximum pressure level of the pump (taps closing). Protection against dry running.
Models Built To Order - Contact Us For Price
Pentax ULTRA S Pumps with Hidromatic H2 Electronic Flow Control
Automatic working pressure systems build up with ULTRA S series pumps. Each set is ready for installation is made by a pump and a Hidromatic H2 pump controller which is a complete replacement of the traditional water system set consisting of a pressure switch and tank. The control of the pump is started after a pressure decrease (taps opening) and stopping when the water flow is interrupted at the maximum pressure level of the pump (taps closing). Protection against dry running.
Models Built to Order - Contact Us For Price
Pentax CAB Pumps Self-Priming Centrifugal Pump Booster Systems Mild Steel Tank
For water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks for transferring liquids and emptying tanks; used in medium sized industrial applications and for gardening.
Automatic working pressure system built with a self-priming centrifugal Pentax CAB electropump. The set is ready for installation, made with a electropump, a pre-rated and adjustable pressure switch, pressure gauge, connector, (and eventually a flexible hose with stainless steel sheath), mild steel membrane tank and power cable. The set specification and performance are related to the adapted electopump, tank capacity and pressure switch rating.
For prices and specifications click on models below
Pentax CAM Pumps Self-Priming Centrifugal Jet Pump Booster Systems
Automatic working pressure system built with a self-priming cast iron Pentax CAM jet electropumps. The set is ready for installation, made with a electropump, a pre-rated and adjustable pressure switch, pressure gauge, connector, (and eventually a flexible hose with stainless steel sheath), membrane tank and power cable. The set specification and performance are related to the adapted electopump, tank capacity and pressure switch rating.
For water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks for transferring liquids and emptying tanks; used in medium sized industrial applications and for gardening.
For prices and specifications click on models below
Pentax INOX Pumps Self-Priming Centrifugal Pump Booster Systems Mild Steel Tank
For water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks for transferring liquids and emptying tanks; used in medium sized industrial applications and for gardening.
Automatic working pressure system built with a self-priming stainless steel Pentax INOX jet electropump. The set is ready for installation, made with a electropump, a pre-rated and adjustable pressure switch, pressure gauge, connector, (and eventually a flexible hose with stainless steel sheath), mild steel membrane tank and power cable. The set specification and performance are related to the adapted electopump, tank capacity and pressure switch rating.
For prices and specifications click on models below
Pentax INOX SS Pumps Self-Priming Centrifugal Pump Booster Systems Stainless Steel Tanks
For water supplies (even if mixed with gas) in small household systems, connected to autoclave tanks for transferring liquids and emptying tanks; used in medium sized industrial applications and for gardening.
Automatic working pressure system built with a self-priming stainless steel Pentax INOX jet electropump. The set is ready for installation, made with a electropump, a pre-rated and adjustable pressure switch, pressure gauge, connector, (and eventually a flexible hose with stainless steel sheath), stainless steel membrane tank and power cable. The set specification and performance are related to the adapted electopump, tank capacity and pressure switch rating.
For prices and specifications click on models below
Pentax Superdomus & VSD Variable Speed Single Booster Pumps
These Systems are built ready to go complete with cable, transducer, 5 way fitting, gauge and 8 litre vessel all connected to the pump. Easy to set up, a few clicks of a few buttons and the set is ready to go.
For prices and specifications click on models below
Pentax Superdomus & VSD Variable Speed Single Booster Pumps WRAS Approved
These Systems are built ready to go (except models Ultra 9S / Ultra 18S) complete with cable, transducer, 5 way fitting, gauge and 8 litre vessel all connected to the pump. Easy to set up, a few clicks of a few buttons and the set is ready to go.
For prices and specifications click on models below
Pentax 2 ULTRA 3S Twin Pump Variable Speed Booster Sets
Constant pressure booster set with 2 pumps (2 ULTRA+VSD) controlled by variable speed drive
VSD (EPIC/IPFC). Horizontal pumps, stainless steel impellers, diffusers, shaft and pump body. Stainless steel suction and delivery manifolds. Unit base and support for control panel in galvanised steel. One check valve for each electric pump, installed on suction side. Ball valves with pipe union installed on suction side and delivery side of each electric pump. Pressure gauge with radial connection.
Pressure sensor connected on the output manifold and electrically connected to VSD. Control box with main switches (one for each pumping unit) to switch off the system, in ABS and IP55 insulation grade.
IPFC VSD are equipped with Bluetooth module in position to be connected to an App for mobile transmitting the working data of the group , these can be changed the booster for a better set up of the parameters.
For prices and specifications click on models below
Pentax 2 ULTRA 5S Twin Pump Variable Speed Booster Sets
Constant pressure booster set with 2 pumps (2 ULTRA+VSD) controlled by variable speed drive
VSD (EPIC/IPFC). Horizontal pumps, stainless steel impellers, diffusers, shaft and pump body. Stainless steel suction and delivery manifolds. Unit base and support for control panel in galvanised steel. One check valve for each electric pump, installed on suction side. Ball valves with pipe union installed on suction side and delivery side of each electric pump. Pressure gauge with radial connection.
Pressure sensor connected on the output manifold and electrically connected to VSD. Control box with main switches (one for each pumping unit) to switch off the system, in ABS and IP55 insulation grade.
IPFC VSD are equipped with Bluetooth module in position to be connected to an App for mobile transmitting the working data of the group , these can be changed the booster for a better set up of the parameters.
Pentax 2 ULTRA 7S Twin Pump Variable Speed Booster Sets
Constant pressure booster set with 2 pumps (2 ULTRA+VSD) controlled by variable speed drive
VSD (EPIC/IPFC). Horizontal pumps, stainless steel impellers, diffusers, shaft and pump body. Stainless steel suction and delivery manifolds. Unit base and support for control panel in galvanised steel. One check valve for each electric pump, installed on suction side. Ball valves with pipe union installed on suction side and delivery side of each electric pump. Pressure gauge with radial connection.
Pressure sensor connected on the output manifold and electrically connected to VSD. Control box with main switches (one for each pumping unit) to switch off the system, in ABS and IP55 insulation grade.
IPFC VSD are equipped with Bluetooth module in position to be connected to an App for mobile transmitting the working data of the group , these can be changed the booster for a better set up of the parameters.
Pentax 2 ULTRA 9S Twin Pump Variable Speed Booster Sets
Constant pressure booster set with 2 pumps (2 ULTRA+VSD) controlled by variable speed drive
VSD (EPIC/IPFC). Horizontal pumps, stainless steel impellers, diffusers, shaft and pump body. Stainless steel suction and delivery manifolds. Unit base and support for control panel in galvanised steel. One check valve for each electric pump, installed on suction side. Ball valves with pipe union installed on suction side and delivery side of each electric pump. Pressure gauge with radial connection.
Pressure sensor connected on the output manifold and electrically connected to VSD. Control box with main switches (one for each pumping unit) to switch off the system, in ABS and IP55 insulation grade.
IPFC VSD are equipped with Bluetooth module in position to be connected to an App for mobile transmitting the working data of the group , these can be changed the booster for a better set up of the parameters.
Pentax 2 ULTRA 18S Twin Pump Variable Speed Booster Sets
Constant pressure booster set with 2 pumps (2 ULTRA+VSD) controlled by variable speed drive
VSD (EPIC/IPFC). Horizontal pumps, stainless steel impellers, diffusers, shaft and pump body. Stainless steel suction and delivery manifolds. Unit base and support for control panel in galvanised steel. One check valve for each electric pump, installed on suction side. Ball valves with pipe union installed on suction side and delivery side of each electric pump. Pressure gauge with radial connection.
Pressure sensor connected on the output manifold and electrically connected to VSD. Control box with main switches (one for each pumping unit) to switch off the system, in ABS and IP55 insulation grade.
IPFC VSD are equipped with Bluetooth module in position to be connected to an App for mobile transmitting the working data of the group , these can be changed the booster for a better set up of the parameters.
For prices and specifications click on models below